The PD45 Post Driver is the most versatile tool of its type available. The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square.
When equipped with optional adapters, the PD45 becomes the ideal tool for driving almost any style or type of post.
Unlike other post drivers that simply rest on the top of the post, the PD45 lets the operator “index” the post in the tool. This gives improved control of the post and driver.
The PD45 features dual guiding handles, a lifting eye and remote or integral ON/OFF valve. Two trigger Valve-in-Handle models are also available. The standard model is the same as our remote ON/OFF valve model but allows for local control of the post driver. It will drive posts to within 4 inches (100 mm) above ground level.
Both trigger Valve-in-Handle models have an ON/OFF trigger adjacent to a guiding handle. It extends the full length of the handle allowing the operator to activate the post driver at any position of its length. The trigger is “spring loaded” to the OFF position. The following post configurations can be driven by the PD45 without accessory adapters.
Standard PD45 Capacities:
• #2, #3 and #4 lb./ft. “U” Channel Sign Post
• #3 and #4 /Strong Back (Heavy Duty) “U” Channel Sign Post
• #1 Delineator Post
• 2-1/2 in./63.5 mm Square Post
• 2-5/8 in./67 mm Round Post
Operation & Performance:
- Weight (w/o valve): 65 lbs.
- Weight (w/ valve): 67 lbs.
- Length: 30"
- Width (across handles): 10-1/8"
- Pressure: 2000 psi
- Flow Range: 7-9 gpm
- Optimum Flow: 8 gpm
- Porting: 8 SAE O-Ring
- Hose Whips: Yes
- Connect Size & Type: 3/8" Pipe
Warranty
Stanley Hydraulic Tools and their associated
parts are warranted against
defects in materials and workmanship
for a period of twelve months
from the date of purchase. Stanley
Hydraulic Tools reserves the right to
repair or replace only those parts
which prove to have been defective
at the time of purchase. This warranty
becomes void if maximum flow and
pressure ratings are exceeded.